Perfect Stitch Regulator
Startup Codes LED 1 – Power This is the power LED. This LED will always be on if there is power running to the board. If light is Off If this LED is not...
Fri, 5 Jul, 2019 at 11:46 AM
Explanation of issue On rare occasion it is possible, usually due to a brown-out condition, for the PerfectStitch controller to get corrupted. The PerfectS...
Mon, 23 Sep, 2019 at 10:50 AM
The motor no longer turns when trying to engage the system, producing a motor error. Check Communication with the system Do you receive an error on com...
Thu, 11 Jul, 2019 at 10:50 AM
On the Perfect Stitch system the pulley on your system has most likely changed and you will need to set the ratio of the pulley. The way to know if this n...
Thu, 11 Jul, 2019 at 9:56 AM
The lights on the Perfect Stitch system won’t light up when the machine is on. Ensure lights are engaged In the Lighting menu, make sure that the white...
Fri, 5 Jul, 2019 at 11:58 AM
Pressing the handle bar buttons doesn’t perform the assigned button function. The buttons aren’t working on the handlebars but they are working on the tou...
Fri, 5 Jul, 2019 at 11:58 AM
In version 4.42, the stitch regulator was found to have this problem. Check the motor ratio 1. Go to Folder -> Diagnostic -> Motor Settings (passwo...
Fri, 5 Jul, 2019 at 12:00 PM
Needle up/Needle down makes a different, labored noise when moving up and down. Baste Mode uses a faster speed To prevent the needle catching in the fa...
Fri, 5 Jul, 2019 at 12:02 PM
The stitches do not stitch evenly in Precision mode. Check encoders Ensure that the encoders are riding freely on the rail. Remove any debris from the ...
Fri, 5 Jul, 2019 at 12:04 PM
03 – Advanced Features and Diagnostics Main Points The main points of this tutorial include: overview of advanced features and diagnostics overview ...
Fri, 5 Jul, 2019 at 12:06 PM