Black Motor Box
This article assumes you have your belts in good tension. If they are too loose, then it will cause the following test to give inaccurate results and diagno...
Mon, 9 Sep, 2019 at 4:26 PM
This article is for when motor errors are frequently occurring and involves your robot/black motor box. Check Motor Belts The most common cause of moto...
Thu, 11 Jul, 2019 at 9:51 AM
This error indicates that the x motor can no longer stay on the track. Remove obstacles Ensure that the tracks are clean and there are no obstacles tha...
Fri, 5 Jul, 2019 at 10:47 AM
This error indicates that the y motor can no longer stay on the track. Remove obstacles Ensure that the tracks are clean and there are no obstacles tha...
Wed, 4 Sep, 2019 at 10:28 AM
Counter Clockwise Whenever the machine is moving in a positive direction (i.e. forward towards the quilter or to the right) the black belt should be turni...
Fri, 5 Jul, 2019 at 11:24 AM
Sometimes the robotics belts can vibrate if assembled incorrectly or if settings aren’t optimal for the quilt machine setup. Tighten belts Your belts may...
Fri, 5 Jul, 2019 at 11:26 AM
The robotics makes a loud noise when it moves to the home position of a pattern. Check belt tension Ensure that your belts are attached properly and ha...
Wed, 10 Jul, 2019 at 11:01 AM
The white belt is slipping, disrupting the quality of the stitched patterns. Inspect Pulley ensure that the grooves in the pulley are free of any debri...
Wed, 10 Jul, 2019 at 11:04 AM
A brief overview of the lights in the black motor box. Program Running If the green light in the lights pipe is flashing, then the robotics program is ...
Tue, 31 Dec, 2019 at 10:20 AM